Finding reliable flatbed tail lights with LED technology can improve road safety, visibility, and compliance on 12V systems. The following selections cover universal compatibility, durable housings, and bright illumination for trucks, trailers, boats, RVs, and flatbeds. Each option focuses on durable materials, weatherproof ratings, and easy installation while delivering crisp red stop and turn signals, plus bright white reverse lights where applicable. Use this guide to compare performance, installation needs, and compatibility across common flatbed setups.
Summary of Selected Products
| Product | Brand | Key Benefit | Light Type |
|---|---|---|---|
| MAXXHAUL 80685 Universal Square 12V LED Tail Lights | MAXXHAUL | High brightness with 28 LEDs and corrosion-resistant ABS housing | 38-LED family: red and white LEDs |
| Partsam 6x Oval LED Trailer Tail Lights 10 LEDs | Partsam | Fast surface-mount with rubber grommets, IP67 rated | 10 LEDs per light, red/white |
| Partsam Pair 38 LED Universal Tail Lights | Partsam | Dual-lamp kit, DOT compliant, bolt-in option | 38 LEDs per light, red/white |
| Konrali 6Pcs 5×3 Led Tail Lights Kit | Konrali | Rectangular, grommeted, 12V with 6 lights per kit | 5×3 LEDs, red/white |
| Nilight 6 Inch Oval Tail Lights TL-01 | Nilight | Surface-mount with flush grommets, IP65 water resistance | 10 LEDs per light, red/white |
MAXXHAUL 80685 Universal Square 12V LED Tail Lights
The MAXXHAUL 80685 tail lights combine a rugged ABS housing with PMMA lenses designed for UV resistance and crystal-clear visibility. The housing is sonic-welded for durability, and stainless front screws boost corrosion resistance, helping these lights withstand harsh outdoor conditions. A standout feature is the 28-LED array: 16 red LEDs handle stop, turn, and tail signaling, while 18 white LEDs cover reverse illumination and license plate lighting with four additional white LEDs. This configuration improves daytime contrast and nighttime visibility on flatbeds, trailers, and utility vehicles. The lights are intended for 12V systems and are compatible with trucks, trailers, RVs, vans, buses, and boats, though some Wrangler installations may require minor modifications.
Features imply a strong emphasis on reliability in challenging environments. The lights are designed for long service life, with a focus on multi-segment signaling that reduces failure risk in complex signaling scenarios. Installation requires mounting on flat surfaces and connecting to a 12V power source, with attention to wiring polarity and waterproofing. Their universal fit makes them suitable for a range of flatbed and trailer configurations.
Partsam 6x Oval LED Trailer Tail Lights 10LEDs
This Partsam kit delivers an easy surface-mount solution with rubber grommets and a three-prong plug system for straightforward connection. Each light contains 10 high-quality LEDs delivering two brightness levels: a high mode for turn and brake functions, and a low mode for running and tail lights. The package includes four red lights and two white reverse/backup LEDs, enabling a visible, low-profile tail-light array for flatbeds, trailers, and recreational vehicles. The lights are IP67 rated for weather resistance, helping maintain performance in rain and road spray.
Compatibility and installation practicality are key here. The 3-prong, water-sealed plugs simplify wiring, while the enclosed grommets provide reliable mounting in tight spaces on flatbeds or travel trailers. Users should verify mounting hole alignment and ensure a suitable surface to accommodate the plug and housing. The dual-color approach consolidates functions into a compact footprint.
Partsam Pair 38 LED Universal Tail Lights
These Partsam tail lights pair a 12V system with a robust 38-LED configuration per light, featuring 16 red LEDs for stop/turn/tail and 18 white LEDs for reverse lighting. An additional four white LEDs provide license plate illumination. The kit is designed for flexibility: backed by DOT-compliant status for street use, mountable on most flat surfaces with a 2″ to 2.2″ bolt distance. It is not a Wrangler-specific replacement, and some drilling or bodywork may be required for installation. The housing is weather-resistant, and the setup aims for a durable, long-lasting solution in demanding outdoor environments.
Wiring is straightforward but requires careful splicing if mounting on older trucks or custom flatbeds. The product emphasizes a compact, bolt-in footprint while delivering a comprehensive signaling package. Potential buyers should plan for slight adaptation to existing wiring harnesses and ensure correct wiring polarity to avoid signaling misfires.
Partsam 2Pcs LED Tail Lights Assembly
This two-pack from Partsam is designed as bolt-in replacements featuring 56 red 2835 LEDs plus 3 red 3030 LEDs on each tail light, plus 24 white 3030 LEDs on the driver side and 18 white 3030 LEDs on the passenger side for license lighting. The lenses are removable to facilitate access for wiring and maintenance. The kit ships with the necessary mounting studs and hardware, but careful attention must be paid to-fit compatibility and potential modifications on certain Jeep Wrangler or flatbed setups. The lights run on 12V and offer a relatively low current draw, with an emphasis on brightness and reliability.
Wiring is described as straightforward, with ground, reverse, tail, and stop/turn channels clearly delineated. The installation notes highlight cutting and splicing from the stock pigtail where needed, which can appeal to builders customizing flatbeds or trailers. Prospective buyers should consider whether the included hardware aligns with their mounting pattern and whether any trim or fascia changes are required for a clean, weatherproof seal.
Konrali 6Pcs 5×3 Led Tail Lights Kit
The Konrali kit provides six rectangular 5×3 LED tail lights designed for flatbed trucks, semis, trailers, and RVs. Each unit uses a recessed mount with rubber grommets and standard 3-wire pigtails. The 12V operation and compact dimensions make them suitable for tight mounting areas. The red lens houses 12 LED diodes for stop/turn/brake signaling, while the white LEDs handle backup and license illumination. The included wiring plan designates ground, reverse, tail, and high-brightness channels. Installation notes indicate bolt-through mounting on a platform with potential need for body modification depending on vehicle model. The assembly is weatherproof and designed to resist water, shock, and vibration.
Design considerations focus on compatibility and ease of install. The set is broader than some factory configurations, so users should verify mounting hole spacing and clearance for the grommets. The kit’s multiple LEDs provide redundancy and improved visibility, though some applications may require adapters or custom wiring to integrate with existing lighting circuits.
Nilight TL-01 6″ Oval Tail Lights
Nilight’s TL-01 6″ oval tail lights offer a compact, easy-to-install solution with 10 LEDs per light. The design emphasizes surface mounting with included grommets and a three-prong watertight plug for quick wiring. The IP65 rating highlights resistance to water and dust, making them suitable for exposed flatbeds and trailers. The dual-color red and white LEDs deliver strong signaling for stop, turn, braking, and reverse illumination, with a focus on reducing power usage while maintaining visibility. The installation footprint is carefully sized for typical flatbed holes, and the lights are designed to stay secure under vibration and road conditions.
As a lower-profile option, these Nilight lights provide a balance between brightness and size, appealing to builders who need firm mounting without protruding hardware. Buyers should ensure a match with their vehicle’s power output and confirm the wiring harness compatibility to prevent accidental cross-signaling.
Nilight 4PCS 6″ Oval LED Trailer Tail Lights
This Nilight set includes four 6″ oval LED tail lights designed for RVs, trucks, and trailers. Each light features 10 high-quality SMD LEDs, delivering strong red stop/turn and white reverse lighting. The surface-mount design with flush grommets ensures a clean installation on flatbeds and trailers, while the three-prong plug simplifies wiring. The lights are IP65 rated, offering weather resistance against water and dust in outdoor environments. The compact 6.6″ x 2.5″ footprint makes them a versatile choice for tight mounting locations on flatbeds and utility trailers.
Buyers should evaluate the per-light brightness, the overall kit configuration, and how the extra 4-pack aligns with their planning for front and rear signaling. Compatibility with existing wiring, fuse protection, and ground integrity are essential for consistent performance in rugged work settings.
Partsam 2Pcs LED Tail Lights Assembly
This Partsam two-pack emphasizes a dual-assembly approach with comprehensive LED configurations for red signaling and white license lighting. The design supports bolt-in replacement on compatible vehicles and features driver-side and passenger-side configurations with dedicated white license plate lighting. The white wires act as ground, and the color-coding for red and black wires aligns with high-brightness stop/turn and low-brightness tail functions. The kit is designed for 12V operation and emphasizes weather resistance, allowing installation on flatbeds, trailers, and compatible trucks. Lenses are removable to facilitate access during maintenance or wiring adjustments.
Users should note that some installations require wiring harness splicing and potential body modifications to accommodate mounting holes or enlarging bolt holes. When planning a retrofit, verify that the mounting pattern matches the existing frame and that the licensing illumination meets local requirements. The kit’s emphasis on brightness and reliability supports consistent signaling in work environments.
Buying Guide: What To Consider When Choosing Flatbed LED Tail Lights
- Voltage and compatibility: Confirm the system is 12V or 24V, and ensure compatibility with your vehicle’s wiring harness and fusing.
- Lighting configuration: Decide between kits that provide separate red stop/turn/tail lighting and white reverse/license lighting versus combined LEDs. Consider the number of LEDs and brightness levels for daytime visibility.
- Weather and durability: Look for IP ratings (IP65, IP67) and materials like UV-resistant lenses, corrosion-resistant housings, and stainless hardware to endure rain and road debris.
- Mounting and fit: Check bolt hole spacing, surface area, gasket integrity, and whether grommets are included. Some installations need drilling or minor bodywork.
- Ease of installation: Prioritize lights with plug-and-play connectors or clearly labeled wiring for ground, power, and signal lines to reduce install time.
- Legal compliance: Ensure DOT or local regulations apply to the lighting configuration to avoid road-use issues.
- Maintenance and service: Consider removable lenses and accessible wiring connections for easier repair and replacement.
- _price-to-performance: Compare brightness, durability, and included hardware to determine overall value for flatbed needs.
In practice, buyers should map their exact mounting footprint and harness layout before purchasing. For flatbeds with limited space, smaller oval shapes or compact rectangular units can reduce protrusion while maintaining visibility. If upgrading a whole trailer or fleet, consider uniform light kits for consistent signaling and easier maintenance across vehicles.